HIGH SPEED “BARRELESS” SPRING CONTACTS
Updated: Oct 19

”Barreless” spring contacts were developed to reduce the spring-contact cost and to improve the signals transfer. These kind of contacts required appropriate socket. Short pins enable higher speed performance. ADR offers short “barreless” spring contacts in length of 3-4mm.
The contact is made of one or three parts only.
The one-piece spring contact is a low cost solution because it doesn’t require assembly process during production. Additionally, this technology enables better frequencies & current transferring. The minus of this solution is the life cycle which is lower compare to the traditional design.
The three-piece spring contact construct of a blade contact, operates inside the spring. This structure enable long travel and better frequencies & current transferring.
SPECIFICATIONS
MECHANICAL SPECIFICATIONS: |
Recommended travel: 0.55 mm |
Contact force: 16 g at full travel. |
Operation cycles: 100,000 cycles min. |
ELECTRICAL SPECIFICATIONS: |
Bandwidth : Up to 50GHz |
Insertion loss: -1 dB at 40Ghz. |
Return loss: -10 dB at 40Ghz. |
ENVIRONMENTAL SPECIFICATIONS: |
Temperature range: -40/+150 ℃. |
MATERIALS: |
Plunger: BeCu. |
Spring: SUS. |



