22MM PB - "PUSH TO RELEASE" CONTACTS
Updated: 3 days ago
When easy assembly & repair is required, “Push to release” connection, makes process very simple. The switch itself is mounted to the panel while the contacts are removable. A locking mechanism between the switch & the connector prevent any disconnections even under vibrations or shocks.
ADR offers a set, includes a 22mm anti-vandal switch & a “push to release” connector, wired according the switch electrical diagram. The wire length is according needs. The opposite side of the harness is customable.
Switch rating is 5A/24VDC.
Water & dust protection level is IP-67.
Momentary or latch functions are available.
Electrical functions are SPDT & DPDT.
Mechanical life cycle: 500,000.
Wide range of single & bi-color illumination is available.
Illumination voltage: 3/6/12/24/110/220 volts
SPECIFICATIONS
MECHANICAL SPECIFICATIONS: |
Function: Alternate—Latch. |
Mechanical cycles: 500,000 cycles Min. |
Total plunger Travel: 3.2mm. |
Torque: 5-14Nm |
ELECTRICAL SPECIFICATIONS: |
Contact form: 1XChangeover. |
Maximum rating: 5A/24VDC. |
LED: White. |
Contact resistance: 50m Ohm. |
Dielectric strength: 2000V RMS |
ENVIRONMENTAL SPECIFICATIONS: |
Temperature range: -20/+55 ℃. |
Water & Dust protection: IP-67, IK-10. |
MATERIALS: |
Bushing: Stainless Steel. |
Base: PBT UL94-V0 |
O-Ring: Silicon. |
Contacts: Brass Silver plated. |
