POWER ENTRY MODULES
Updated: 3 days ago
AC Power entry modules purpose is to filter the mains - to block high frequencies from leaving an electronic device.
You may use it together with a 2 pole switch & fuses. Standard scheme described below.
ADR have a wide range of power entries for 2000 PE, rated up to 20A/250VAC and Leakage current lower than 500µA
Ground choke & Bleeder resistor are optional.
Termination options are Wires, Quick-connect,
Solder-lug & PCB pins.
Water proof case is optional.
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS: |
Current rating: 10A. |
Dual-fuse holder and a 2-pole rocker switch. |
Leakage current: Each line to ground: 0.6mA Max. |
Hipot rating (For 1 minute): L-to-L 1450VDC, L-to-G 2250VDC |
Insulation resistance: 250VDC/100m OHM |
Direct current resistance: 0.1 Ohm Max. |
ENVIRONMENTAL SPECIFICATIONS: |
Operating temperature range: -25/+85 ℃ |
GET YOUR QUOTE
ASK FOR MORE INFO
