ADR offers In-Vehicle 7” CAN-BUS open-frame TFT display. Features: 1. CAN bus communication interface. 2. Support Custom CAN ID protocol, default baud rate is 250KB. 3. HOST can be used on multiple platforms, such as Computer (with USB to CAN-Dongle), MCU, Raspberry Pi (with PiCAN2). 4. Self testing after booting function. 5. Built in flash memory, store the font and Object Dictionary Data. 6. Capacitive touch panel (CTP) with anti-glare coating. 7. 12V power supply

This display is a color active matrix TFT LCD module using amorphous silicon TFT's as an active switching devices. This module has a 21.5 inch active area with FHD resolutions (1920x1080). Each pixel is divided into RED, GREEN, BLUE dots,  arranged in vertical stripe and this module can display 16.7M colors.  The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.

This is a Color Active Matrix Liquid Crystal Display, composed of a TFT display, a driver and power supply circuit, and a LED backlight. The display designed with wide viewing angle, wide temperature and long life LED backlight. It fit industrial applications The module have a unique 2  advantages: it’s high brightness (1500 cd/m2) & it’s wide temperature range (-30/+85°C).

This is a color active matrix TFT (Thin Film Transistor) LCD (liquid crystal display) that uses amorphous silicon TFT as a switching device. The module is composed of a Transmissive type TFT-LCD panel, driver circuit & back-light unit.   The module have a unique 2  advantages: it’s high brightness (900 cd/m2) & it’s wide temperature range (-30/+85°C).   The resolution of this 2.0” TFT-LCD is quite high— 480x360 pixels, and the contrast ratio is 1000. it can display

HDMI interface is an easy way to connect a display to your system. It required a very standard cable to transfer high resolution photos and video. Usually, it serves low & medium volume projects. ADR offers a range of small displays (between 2.5” to 8.0”) with HDMI interface.

This 2.4” TFT module is a good choice for outdoor hand-held applications. It combines a good brightness with a low power consumption . Brightness level is about 500cd/m2 . This level enable a reasonable visibility even in a full daily light. The display have other features that help to reduce power consumption as, Normally black screen, a “sleep mode” and internal RAM that reduce the need of continues refresh.

ADR offers a Round a-Si TFT display module with HDMI adapter (optional). Display size is about 3.4 inch ( 87.60 AA ). MIPI 3 lane Interface enable high & low speed modes to serve different applications and to reduce power consumption. The optical aspects are very good and include wide view angles, contrast ration of 800 and luminance of 350 Nits.

1000 NITS 1.77” DISPLAY

ADR offers this very new 3.2 inch a-Si TFT display module with MIPI interface, for video transfer. The LCD driver complies with the following standards: MIPI DSI V1.01 & MIPI D-PHY V1.0. Brightness of 400 nits and & high contrast ratio, enable this display to serve both indoor & outdoor applications. Sleep mode, internal memory & other features, help to reduce power consumption during operation.

Key switch is commonly used as a safety product. you can find it in systems like Medical, Military, Machinery and others, electrical function options are wide - similar to rotary switch. ADR offers 2 unique features: 1. Short body length behind panel, down to 19 mm only (standard is around 40mm).

When you have to choose a display for outdoor application, check the transflective option. It gives you benefits. By adding half mirror film over the backlight, the external light source (sun) improves the visibility of the display and eliminate the need to increase backlight luminosity.