What kind of scree should be chosen in order to eliminate light reflections from display? Anti-Glare or Anti-Reflection? The answer is depend on the environment where your display located. Note: AR is a coating, while AG is a glass surface treatment. Be aware that there are levels for the AG treatment, Each gives a different effect. The AR transfer the light better. The AG scattered the light better. ADR recommend to use AR coating whenever your screen exposed to a “lighted environment”, specially outdoor, were the light comes from a long distance source. AG screen makes a “good job” where you have close light sources, specially indoor and high resolution is not “must”. GET YOUR QUOTE DOWNL
MPO connectors, supplied by ADR, offer some advantages. First, a special mechanism enable to change connector’s polarity in an easy & quick way, without any tool. Second, a micro version offers a length of 18.1mm only. Third, you can get them with an angled boot. These new versions are IEC 61754-7 and TIA/EIA 604-5 Compliant for MPO/MTP® interfaces. Standard (typical) insertion loss is about 0.25dB & low loss is 0.1dB. The MPO range includes also relevant adapters & Patchcords. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO
The best way to indicate a switch function is by marking it with a symbol or a word. The alternative — to indicate the function on the panel, near by the switch, is less clear for the user, takes up panel space and sometimes expensive. Printing on a switch is not always easy. Switch material & front surface treatment have to be considered, in relation to the printing method. ADR offers the service of printing on switches, both metal & plastic. We can even offer the possibility to print on a non flat surface. For some of our switches, we can offer sticky labels instead of direct marking. Another option is to use a switch with removable cap & place the marking under GET YOUR QUOTE DOWNLOAD PD
ADR offers IR emitters, to be used in several applications, mainly IoT & medical apps. Packed in a small form, about 3.5x3.5mm with standard wavelength of 850/940nm & low thermal resistance, they are perfect for applications like: imaging sensors (face recognition), camera illuminator, skin/blood testers, traffic control, counting systems, security systems & more. Products are ESD protected & can be used in a wide temperature range. The range includes wide varieties of viewing angle and radiant intensity. All products are RoHS compliant and suitable for SMT assembly. Note: A combined product of daily & IR light is also available GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #LEDIRINFRAREDIL
