חיפוש

AG vs AR SCREEN

What kind of scree should be chosen in order to eliminate light reflections from display? Anti-Glare or Anti-Reflection? The answer is depend on the environment where your display located. Note: AR is a coating, while AG is a glass surface treatment. Be aware that there are levels for the AG treatment, Each gives a different effect. The AR transfer the light better. The AG scattered the light better. ADR recommend to use AR coating whenever your screen exposed to a “lighted environment”, specially outdoor, were the light comes from a long distance source. AG screen makes a “good job” where you have close light sources, specially indoor and high resolution is not “must”. GET YOUR QUOTE DOWNL

POLARITY CHANGE MPO

MPO connectors, supplied by ADR, offer some advantages. First, a special mechanism enable to change connector’s polarity in an easy & quick way, without any tool. Second, a micro version offers a length of 18.1mm only. Third, you can get them with an angled boot. These new versions are IEC 61754-7 and TIA/EIA 604-5 Compliant for MPO/MTP® interfaces. Standard (typical) insertion loss is about 0.25dB & low loss is 0.1dB. The MPO range includes also relevant adapters & Patchcords. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO

SPECIAL SYMBOLS

The best way to indicate a switch function is by marking it with a symbol or a word. The alternative — to indicate the function on the panel, near by the switch, is less clear for the user, takes up panel space and sometimes expensive. Printing on a switch is not always easy. Switch material & front surface treatment have to be considered, in relation to the printing method. ADR offers the service of printing on switches, both metal & plastic. We can even offer the possibility to print on a non flat surface. For some of our switches, we can offer sticky labels instead of direct marking. Another option is to use a switch with removable cap & place the marking under GET YOUR QUOTE DOWNLOAD PD

COMPACT IR EMITTER

ADR offers IR emitters, to be used in several applications, mainly IoT & medical apps. Packed in a small form, about 3.5x3.5mm with standard wavelength of 850/940nm & low thermal resistance, they are perfect for applications like: imaging sensors (face recognition), camera illuminator, skin/blood testers, traffic control, counting systems, security systems & more. Products are ESD protected & can be used in a wide temperature range. The range includes wide varieties of viewing angle and radiant intensity. All products are RoHS compliant and suitable for SMT assembly. Note: A combined product of daily & IR light is also available GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #LEDIRINFRAREDIL

Zavitan 10st, Tel-Mond 4062709 ISRAEL / adr@adr-technology.com / +972-(9)97962374 / +972-(0)53-2292208