חיפוש

OPEN-FRAME + SBC MODULE

When a display with processing resources is required for a system, an Open-frame with SBC combination is a simple & cost effective solution. During last years, this solution became popular and less expensive. The variations are almost unlimited. SBC’s standard size is 3.5” and almost any processor can be added—Core, Atom, Pentium and others. Also RISC SBC’s are popular, based on ARM Cortex, MX6processors. Some of them support wide temperature range of –40/+85 degree Celsius. The Open-frame display is usually connected via LVDS. Standard sizes are 5”, 7”, 10” & 15”. Adding Touch-screen, AR or AG coating to the display are quite standard. requests for many applications. GET YOUR QUOTE DOWNLOA

LIGHTED & FLAT TOUCH-KEYS

New key-pads generation is based on capacitive sensors. It gives the user additional advantages comparing the standard Rubber/Lexan key-pads. *High reliability. *Large design options. *Better luminosity. Sensor layer is flexible and gives the opportunity to use it on non-flatted base. Luminosity can be made by LED light or, by EL fabric. It is possible to add “Haptic” feedback, to receive better feeling. ADR supports clients during the design stage. Design involved all layers—lighting, sensing & decoration cover. No minimum order. ADR support also traditional key-pads design. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #touch #switch #illumination #sensor #keypad

EMI PROTECTION + HEATER

Displays work under harsh environments need additional features to enable appropriate operation. EMI shielding achieved by using mesh wire bonded to a glass, connected to conductive frame that in contact with the system body. Frame can be one or double sided. Usually, this layer eliminate the possibility to use CTP. The solution is based on RTP that can be configurated into multi-touch. When touch-screen have to work under very low temperature, additional heating layer is bonded to the bottom side of the TP and increase the temp. Both solutions is provided by ADR, separately or as one unit. ADR supply also Multi-touch RTP option. Standard sizes are 10.1”, 12.1” & up to 22” GET YOUR QUOTE D

HIGH-POWER ILLUMINATOR

Hi power LED illuminators are widely used in today industry. It replaced almost all other traditional technologies. You have a variety of luminosity, angle shapes, colors and even different white color. Additionally, you have such laminators for the UV & IR spectrum. ADR offers wavelength range of 365nm-1650nm. Standard angle shapes are +/-9,22,45 & 64 deg. According to the chosen lens. Illuminator structure includes 1,2 or 3 chips and can be supported with additional Ceramics Insulator. Radiant Intensity can reach 16000 mW/sr. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #led #illuminator #highpower #light #daylight #slr

FINGERPRINT SENSOR

The fingerprint sensor we provide, based on capacitive-contact technology with hardened surface and enhanced ESD resistivity. The build-in analog and digital circuitry minimizes the number of external component, and provides easy-to-use, standard SPI interface to microprocessors. The operation is controlled through fingerprint image sensing by pixel array, A/D converting, digital process, following is simple interface protocol. The captured image quality can be adjusted by setting gain, offset and reference voltage parameters. In addition, the internal operation parameter and interface speed can also be configured to the need. Relevant applications are security devices and identification /

MINIATURE CODED SWITCH

Coded switches are popular in control systems. ADR offers those switches in 4, 6, 8, 10 & 16 positions configuration. You can get a waterproof (IP67) or low profile options. Low profile style comes in T&R package while the washable usually comes in a tube package. ADR offers custom caps & actuators for high volume orders. Standard rating is 42V/100mA. Insulation resistance is 100MOhm. Mechanical size is 10x10mm for waterproof version & 7.40x7.40mm for low profile option. Applications: control systems, data communication & others. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #switchcodecodedrotaryencoderpcb

ONLY 2.7mm MICRO-SWITCH

Reliable & small. That’s the main advantages of the above micro-switch series. Together with operating travel of 1mm and only 2.7mm width, it gives a perfect indication solution for compact packaging or micro motion systems. PCB mounting’s options are vertical or horizontal, Through-hall or SMT. Lever can be made of plastic (for consuming app mainly ) or from metal (for industrial app mainly). temp. range is –40 t0 +80 Celsius degree. Power rating is 30VDC/0.5A. ADR add this series to a large micro-switches range we offer to our clients, includes water-proof, high power and ON-OFF options. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #switch #microswitch #smt #miniature #roller

Zavitan 10st, Tel-Mond 4062709 ISRAEL / adr@adr-technology.com / +972-(9)97962374 / +972-(0)53-2292208