חיפוש

FOOT Switch + SAFETY elements

FOOT switch can be operated accidently and makes a big damage. There are 2 ways to protect it against such problem. The first is electrical circuit that disconnect all contacts promptly, when the switch is pushed to the lower position. The second is mechanical safety cover around the electrical unit. This cover should be made from a strong material that does not break, even on high impact loads. Electrical functions can be up to 2NO+2NC, Momentary or Alternate. CAM or MICRO switches options are available. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #footswitchCONTACTnormallyopensefety

MEMS scan projection display

MEMS laser scan projection display can be used in applications like AR/MR display, HUD/LiDAR, Pico projector & 3D camera. For example, With fiber coupled RGB lasers and a 2D MEMS mirror, designer can separate the near eye display from the bulky electronics and battery for a compact and lightweight AR HMD. ADR offers a 1D scanning mirror, based on resonant operation and 2D scanning mirror, based on raster. Additionally the chipset includes MEMS position sensor & Scan display controller. The 1D MEMS mirror operates with optical scanning angle as large as 86 degree and resonant frequencies from 500Hz to several kilohertz. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #projectionprojectornednear

FANLESS & IP67 Enclosures

In order to protect your CPU and MB boards, overheating problems must be considered when it comes to the enclosure design. ADR offers a line of enclosures suited for fanless boards. The line includes enclosures for 3.5” SBC & Mini-ITX board in various powers, between 15W to 45W maximum, All equipped with heat sinks. Waterproof design is also available and it made according to your specific connectors request. A complete product, includes the right board mounted is available for some of the types. GET YOUR QUOTE DOWNLOAD PDF ASK FOR MORE INFO #ip67ip65boxenclosureconnecttorheatfanless

Resistive vs Capacitive TOUCH

Touch-screen technology became the major player in the HMI field. Currently, there are different touch options, Each of them have Pros & cons. The main touch technologies are Resistive, Capacitive, Infra & Acoustic. ADR offers all of them. Resistive & Capacitive are the most popular technologies, mainly because of their price. Capacitive touch (CTP) front layer is made of glass. It gives better durability, resistance against scratches, better Appearance & UV Degradation Protection. The new PCAP technology enable to use the CTP with thick gloves. Resistive touch (RTP) is made of plastic front layer. The technology itself still gives better response to gloves & a price advantage. GET YOUR QUOT

Zavitan 10st, Tel-Mond 4062709 ISRAEL / adr@adr-technology.com / +972-(9)97962374 / +972-(0)53-2292208